Connect the VGA cable from your VGA monitor to the VGA OUT of the DVD/MPEG-2 Playback Card. Attach the other end (15-pin "D" shape) of the cable to the output port on your VGA card or your PC's VGA output port.ģ. Attach the round 9-pin DIN connector of the provided External VGA Pass-Through Cable to the VGA IN connector at the back of the REALmagic Hollywood Plus DVD/MPEG-2 Playback Card (refer to Figure 1).Ģ. (Refer to Figure 1 earlier in this Chapter for reference.) Follow the steps to connect the DVD/MPEG-2 Playback Card to your VGA output (see Figure 2).ġ. Your REALmagic Hollywood Plus DVD/MPEG-2 Playback Card must be connected to your VGA card or your PC's VGA output port in order to display MPEG video on your VGA monitor. ![]() This will not affect the audio of DVD-Video or DVD-ROM titles. Otherwise, you will not be able to play CD-Audio titles with the DVD-ROM drive. Note: If you are installing a DVD-ROM drive at the same time as the REALmagic Hollywood Plus DVD/MPEG-2 Playback Card, remember to attach the CD-Audio cable from the DVD-ROM drive to your sound card. Here's a brief excerpt from the installation manual: Note: If you are installing a DVD-ROM drive at the same time as the REALmagic Hollywood Plus DVD/MPEG-2 Playback Card, remember ![]() I've a REALmagic Hollywood Plus DVD/MPEG-2 Playback card.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |